Gear units MOD Tooth Number Face Width (B) Ø D3 (BORE) Ø D2 (PCD) Ø D1 Part Number 1.5 24 15 12 38.197 41.197 131-015-024 2 17 20 12 36.075 40.075 131-020-017 3 17 30 12 54.113 60.113 131-030-017 4 17 40 12 72.150 80.150 131-040-017 5 17 50 20 90.188 100.188 131-050-017 6 17 60 20 108.226 120.226 131-060-017 8 17 80 20 144.301 160.301 131-080-017 10 17 100 20 180.376 200.376 131-100-017 MOD Tooth Number Face Width (B) Ø D3 (BORE) Ø D2 (PCD) Ø D1 Part Number 1.5 24 15 12 38.197 41.197 132-015-024 2 17 20 12 36.075 40.075 132-020-017 3 17 30 12 54.113 60.113 132-030-017 4 17 40 12 72.150 80.150 132-040-017 5 17 50 20 90.188 100.188 132-050-017 6 17 60 20 108.226 120.226 132-060-017 8 17 80 20 144.301 160.301 132-080-017 10 17 100 20 180.376 200.376 132-100-017 Design Parameter Value Helix Angle R/H 19° 31’ 42” Pressure Angle 20° Tooth Form DIN 867 Material PU Foam Design Parameter Value Helix Angle L/H 19° 31’ 42” Pressure Angle 20° Tooth Form DIN 867 Material PU Foam 81 PLEASE SEE OUR LUBRICATION SYSTEMS CATALOGUE FOR MORE INFORMATION ON OUR PROGRAMMABLE AUTOMATIC LUBRICATION PUMPS AND SUITABLE LUBRICANTS FAX: 01827 253390 www.apex-trans.co.uk TEL: 01827 253340 sales@apex-trans.co.uk Worms and Worm Wheels worm 7 .0 Bevel Gears aight Teeth . 1 For Lubricating Standard Helical R/H Racks Helical Lubrication Pinions For Lubricating Standard Helical L/H Pinions Lubrication pinions are supplied complete with suitable bushing and sleeve bearing Must be pre-lubricated prior to installation ! Lubrication pinions are supplied complete with suitable bushing and sleeve bearing Must be pre-lubricated prior to installation !