Gear units 134 70 55 52 50 20 38 15 30 = = M8 x 16 Ø6.8 THRU M4 x 6 5 C D 6 7 8 A B 541-132-923 WEIGHT: A3 SHEET 1 OF 1 SCALE:1:20 DWG NO. TITLE: REVISION DO NOT SCALE DRAWING MATERIAL: DATE SIGNATURE NAME DEBUR AND BREAK SHARP EDGES FINISH: UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: Q.A MFG APPV'D CHK'D DRAWN bove with 1 rack and shaft option 3 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 573 Max. Input Torque (Nm) 8 Max. Capacity (kg) 80 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 3.5 Module 1 Tooth Quality 8 h27 Pinion No of Teeth 20 Standard Rack No of Teeth** 923 Theor. Rack Length (mm)** 2900 Shaft Option Description 1 DIN ISO 14 Spline bore input 6 x 11 x 14 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø10mm h7 3x3 P9 keyway 01827 253390 wmh-trans.co.uk * ETG100 high quality alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) C D 8 A B REVISION C D 8 A B 75 FAX: 01827 253390 www.apex-trans.co.uk TEL: 01827 253340 sales@apex-trans.co.uk Worms and Worm Wheels worm 7 .0 NOTE: Example jack shown abov 80 80 RACK LENGTH 26 48 45° M6 x 12 50 14 h7 5x5 KEYWAY 55 25 h6 M8 x 16 Ø6.8 THRU Ø6 H7 x 5 M10 x 10 (FOR GREESE NIPPLE) M10 x 30 (BOTH ENDS) D E F C 1 2 3 4 B A 3 2 1 4 TEL: 01827 288122 sales@wmh-trans.co.uk FAX: 01 www.wm NOTE: Racks move in opposite directions when the input gear is rotated Twin Travelling Rack R2 - 200 kg Capacity Twin Travelling Racks RACK LENGTH 110 47 110 45° 72 M8 x 12 174 80 60 15 45 72 18 61 = = M4 x 8 M10 x 20 Ø8.5 THRU 72 60 32 h6 25 h7 8x7 KEYWAY M12 x 35 (BOTH ENDS) M10 x 20 Ø8.5 THRU Ø6 H7 x 3 M10 x 10 (FOR GREESE NIPPLE) 3 2 5 4 6 7 DO NOT SCALE DRAWING DEBUR AND BREAK SHARP EDGES FINISH: UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: Shaft Option Description 1 DIN ISO 14 Spline bore input 6 x 16 x 20 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø20mm h7 6x6 P9 keyway Model 541-232-369 Travel per Input rev (mm) 125.6637 Max. Travel Speed (mm/s) 600 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 286 Max. Input Torque (Nm) 40 Max. Capacity (kg) 200 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 5.5 Module 2.5 Tooth Quality 8 h27 Pinion No of Teeth 16 Standard Rack No of Teeth** 369 Theor. Rack Length (mm)** 2900 NOTE: Example jack shown above with 2 racks and shaft option 3 * ETG100 high quality alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) NOTE: Racks move in opposite directions when the input gear is rotated Model 541-232-369 Travel per Input rev (mm) 125.6637 Max. Travel Speed (mm/s) 600 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 286 Max. Input Torque (Nm) 40 Max. Capacity (kg) 200 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 5.5 Module 2.5 Tooth Quality 8 h27 Pinion No of Teeth 16 Standard Rack No of Teeth** 369 Theor. Rack Length (mm)** 2900 Shaft Option Description 1 DIN ISO 14 Spline bore input 6 x 16 x 20 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø20mm h7 6x6 P9 keyway NOTE: Example jack shown below with 2 racks and shaft option 3 R1 - 80 kg Capacity Twin Travelling Racks Shaft Option Description 1 DIN ISO 14 Spline bore input 6 x 11 x 14 2 Input shaft one side only 3 Input shaft both sides 4 Hollow bore & key input Ø10mm h7 3x3 P9 keyway Model 541-132-923 Travel per Input rev (mm) 62.8318 Max. Travel Speed (mm/s) 600 Max. Acceleration (m/s²) 30 Max. Input Speed (rpm) 573 Max. Input Torque (Nm) 8 Max. Capacity (kg) 80 Material of Body Aluminium Material of Rack* ETG100 Rack Weight (kg/m) 3.5 Module 1 Tooth Quality 8 h27 Pinion No of Teeth 20 Standard Rack No of Teeth** 923 Theor. Rack Length (mm)** 2900 80 80 RACK LENGTH 26 48 50 14 h7 5x5 KEYWAY 55 25 h6 M8 x 16 Ø6.8 THRU Ø6 H7 x 5 M10 x 10 (FOR GREESE NIPPLE) M10 x 30 (BOTH ENDS) 134 70 55 52 50 20 38 15 30 = = M8 x 16 Ø6.8 THRU M4 x 6 3 2 5 4 6 7 * ETG100 high quality alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) NOTE: Racks move in opposite directions when the input gear is rotated * ETG100 alloy steel has 960-1100 N/mm² tensile strength ** Maximum available rack length / number of teeth (Shorter lengths available upon request) NOTE: Racks move in opposite directions when the input gear is rotated R2 – 200 kg Capacity