b'Air Pick10kg E Pick10kgVacuum GripperExternal Supply Vacuum GripperInternal SupplyFOR G1/4 SUCTION CUPINCLUDED WITH EVERY GRIPPER(1x 40mm & 1x 55mm)FOR G1/4 SUCTION CUPINCLUDED WITH EVERY GRIPPER(1x 40mm & 1x 55mm)Design Parameter Value Design Parameter ValueMaximum Payload (kg) * 10 Maximum Payload (kg) * 10Maximum Torque @ Cup (Nm) 150 Maximum Torque @ Cup (Nm) 150GRIPPER COUPLING Electricity Source Required ? Yes GRIPPER COUPLING Electricity Source Required ? YesISO 9409-1-50-4-M6 ISO 9409-1-50-4-M6SOLD SEPERATLEY TO GRIPPER Compd. Air Source required ? Yes SOLD SEPERATLEY TO GRIPPER Compd. Air Source required ? NoMass Inc. Coupling / Inc. Cup (g) 481 / 515 Mass Inc. Coupling / Inc. Cup (g) 710 / 745Min. Feed Pressure (Bar) 3 Maximum Vacuum(%) 80Max. Feed Pressure (Bar) 7 Gripping Time (ms) ** 150Consumption @ Optimal pressure 135.9 SLPM Release Times (ms) ** 180Max. Vacuum@ Opt. pressure (%) 85 Max. Gripper Acceleration(m/s) 19.6Gripping Time (ms) ** 40 Operating Noise Level (dBA) 64Release Times (ms) ** 10 Supply Voltage (V DC) 2410%Max. Gripper Acceleration(m/s) 19.6 Abs. Max. Supply Voltage (V DC) 28Operating Noise Level (dBA) 70.5 Peak Current (A) 1.8Supply MediaRequirement ISO 8573-1 3.4.3 Min. Power Consumption (W) 1Supply Voltage (V DC) 2410% Ingress Protection (IP) IP40Abs. Max. Supply Voltage (V DC) 28 Operating Temp Range (C) + 5 / + 40Peak Current (mA) 150 * On non-porous surface ** For one 40mm suction cupMin. Power Consumption (W) 1.2Ingress Protection (IP) IP40Operating Temp Range (C) 0 / + 50* On non-porous surface ** For one 40mm suction cupANY COLLABORATIVE ROBOT INSTALLATION MUST ALWAYS BE EVALUATED ON AN ANY COLLABORATIVE ROBOT INSTALLATION MUST ALWAYS BE EVALUATED ON ANINDIVIDUAL BASIS TO DETERMINE THE SUITABILITY FOR WORKING WITHOUT GUARDING INDIVIDUAL BASIS TO DETERMINE THE SUITABILITY FOR WORKING WITHOUT GUARDING16 TEL: 01827 253340 FAX: 01827 253390 TEL: 01827 253340 FAX: 01827 253390 17sales@apex-trans.co.ukwww.apex-trans.co.uk sales@apex-trans.co.ukwww.apex-trans.co.uk'